search

Klein-tools CL1100 Instrukcja Użytkownika Strona 2

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 24
  • Spis treści
  • BOOKMARKI
    • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 1
ENGLISH
CL1100
Instruction Manual
GENERAL SPECIFICATIONS
The Klein Tools CL1100 is an auto-ranging clamp meter. It measures
AC / DC voltage, AC / DC current, resistance, capacitance, frequency, duty
cycle, and temperature. It can also test non-contact voltage, diodes, and
continuity.
•
Operating Altitude:
2000 meters
•
Humidity:
80% max
•
Operating Temperature:
0°C / 32°F to 45°C / 113°F
•
Storage Temperature:
0°C / 32°F to 60°C / 140°F
•
Accuracy Temperature:
18°C / 64°F to 28°C / 82°F
•
Temperature Coeffi cient:
0.1*(specifi ed accuracy) / °C
•
Dimensions:
8.875" x 3.375" x 1.5"
•
Weight:
10.7oz.
•
Calibration:
Accurate for one year
•
CAT Rating:
CAT III 600V
•
Accuracy:
± (% of reading + # of least signifi cant digits)
WARNINGS
To ensure safe operation and service of the tester, follow these instructions.
Failure to observe these warnings can result in severe injury or death.
•
Before each use, verify meter operation by measuring
a known voltage or current.
•
Never use the meter on a circuit with voltages that exceed the
category based rating of this meter.
•
Do not use the meter during electrical storms, or in wet weather.
•
Do not use the meter or test leads if they appear to be damaged.
•
Ensure meter leads are fully seated, and keep fi ngers away from
the metal probe contacts when making measurements.
•
Do not open the meter to replace batteries while the probes
are connected.
•
Use caution when working with voltages above 60V DC,
or 25V AC RMS. Such voltages pose a shock hazard.
•
To avoid false readings that can lead to electrical shock,
replace batteries if a low battery indicator appears.
•
Unless measuring voltage or current, shut off and lock out
power before measuring resistance or capacitance.
•
Always adhere to local and national safety codes. Use individual
protective equipment to prevent shock and arc blast injury where
hazardous live conductors are exposed.
SYMBOLS
~
AC Alternating Current Warning or Caution
DC Direct Current Dangerous levels
DC/AC Voltage or Current Double Insulated Class II
Ground
Safe for disconnect
from live conductors
AC Source
Przeglądanie stron 1
1 2 3 4 5 6 7 ... 23 24

Komentarze do niniejszej Instrukcji

Brak uwag
Powiązane produkty i podręczniki dla Urządzenia pomiarowe Klein-tools CL1100
Urządzenia pomiarowe Klein-tools CL100 Instrukcja Użytkownika     (12 strony)
Urządzenia pomiarowe Klein-tools IR2000 Instrukcja Użytkownika     (24 strony)
  • Cavavin Yukon-trail AMC Intercrown Winchester-repeating-arms
  • Kidde Zestaw do czyszczenia sprzętu Sherwood Przedłużacze Philips Ładowarki do urządzeń mobilnych Ives Akcesoria do montażu na ścianie i suficie Esoteric Sprzęt muzyczny
  • Sony DSC-W120 Asus P4PE AEG HG654320NM LG GR-P227ZCAW Samsung SM-T710
  • Velleman VMa03 Instrukcja Użytkownika Sony XCD-X710CR Instrukcja Użytkownika Iogear GCS72U Instrukcja Użytkownika Philips 196V4LSB2/10 Instrukcja Użytkownika